FOR INSTALLER: Please watch carefully to not void your warranty on the drive recorder.
STEP 1 - HOW TO INSTALL PHLS / VT300SE
(A) Watch Installation Video Below:
Note-skip USB hotspot install step is you are not a cloud subscriber
(B) For more information: Download Drive Recorder Installation Guide
(C) VERY IMPORTANT - One time Calibration Required after Installation Completed:
-Park Vehicle on a level surface
-Power on drive recorder if not already on.
-Please PRESS and HOLD the Emergency button in for 5 seconds until it flashes,
then let go. It will calibrate camera G sensor according to vehicle angle and reboots (2 minute).
(This is required on any new camera install to zero out G sensor).
(D) VERY IMPORTANT - If you are running a video compressor (Additional 4 channel) with yellow mux cable, please note the procedures carefully.
This is required when plugging in / unplugging power at any given time.
WARRANTY WILL VOID IF NOT FOLLOW.
Additional Installation Information
3rd Channel AHD IR Camera w/output trigger - for VT300SE only
AHD Video Compressor - for VT300SE only
Tamper Proof Key Lock Bracket - for PHLS & VT300SE
All Other Accessories
STEP 2 - PC MANAGER SOFTWARE - PC
A) Download PC Manager software & Install Software (Windows only).
This program is required to replay any video downloaded from the cloud or from the micro SD Card.
Here are few useful "How To" links regarding the PC Manager:
How do I access footage from the PC Manager software?
How do I save entire folder of video files?
How do I convert video file to AVI from PC Manager?
How to: Access the Camera Setup.cfg file
How to: Update Camera Record Settings by Setup.cfg file
STEP 3 - CLOUD SERVER (paid subscription only)
This is for paid subscription only. Skip this step is you are not subscribed.
If you would like to use this feature, please contact email@example.com
A) Watch the Introduction to Trackmycam.com below:
To track vehicle & basic navigation around the cloud server
Here are few useful "How To" links regarding the Cloud: